Fuel blocking (F material)
Key words:
Darawang F Material Products
materials
Classification:
Product Description
F material-fuel
Characteristics
Suitable for B2 standard building materials.
The recommend foaming ratio is 40-70 times, such as multiple foaming, the ratio can be increased accordingly.
Good internal bonding, high toughness and high hardness.
Good preservation.
Wide operating range, various plate machines, automatic machines, and manual pressing machines.
Specification and use
Specifications
F-103
F-104
F-105
F-106
Particles (mm)
1.2-1.6
0.7-1.0
0.6-0.9
0.4-0.7
Foaming ratio (Times)
70-85
60-70
50-65
35-50
Application Scope
Oxygen index above 26 building materials, insulation, cold, absolute materials, precision with instrument packaging.
Reference parameters of foaming and molding
Pre foaming equipment
Both are acceptable
Suitable for quantitative foaming machine
Ripening
6-24 hours
6-12 hours
Cooling time
30% slower than B1 level
Magnification
Suggested magnification of 18kg/m ³
Suggested magnification of 18kg/m ³
Flame retardant cycle
Natural storage at 25 ℃ for 28 days
Suitable for quantitative foaming machine
Pre foaming equipment
Both are acceptable
Precautions for use
1. The formed products or plates produced by material F shall be tested for oxygen index. The oxygen index must be ≥ 26 (the samples tested for oxygen index must be naturally placed at 25 ℃ for 28 days in the international GB10801.1-2002) or sent for testing after being dried in a drying room at 65 ℃ for 72 hours.
2. During the production process, it is necessary to strictly prevent other materials from mixing EPS phase to cause pollution, and cannot pass the oxygen index test and combustion test.
3. When the board is foamed at less than 16g/l, it is recommended to foam twice to prevent some foam particles from being damaged, the pores are refined, the molding, heat resistance and expansion are weakened, and the appearance, strength, elasticity and adhesion of the board are deteriorated.
Storage Considerations
1. EPS storage place should be cool and well ventilated. In order to prevent the foaming agent from escaping too fast, maintain a moderate magnification. The storage room temperature is preferably below 25 ℃, and keep ventilated.
2, EPS contains combustible volatile foaming agent, in the storage state will also be alleviated, so the original particles, foam particles or molded products place is strictly prohibited fireworks, static electricity or lightning, so as to avoid danger.
3, raw materials as far as possible first use, keep fresh, in order to obtain stable operating conditions and good products.
Related Products
Get free product quotes
Expandable polystyrene (EPS) is a small granular resin, widely used in the construction industry, Thermal insulation, sound insulation materials, seismic protective packaging materials and waterproof road water conservancy construction field.
Fushun Daluwang Composite New Material Co., Ltd.
Telephone:024-57199666
Address: No.16 -1, Shuangmian Road, Longfeng Street, Dongzhou District, Fushun City, Liaoning Province
Mailbox:597286037@qq.com